RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN C (2003)
16.
Install the front left wheelhouse splash shield. Position the front edge of the splash shield into the support bracket on the bumper (Figure 1).
17.
Install the five (5) inner splash shield screws (Figure 1).
18.
Install the three (3) splash shield to fender screws (Figure 1).
19.
Connect the electrical connector push pin fastener to the splash shield.
20.
Check the transmission fluid level and add additional ATF+4 transmission fluid (Mopar P/N 05013457AA) as required and recheck level.
