dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Technical Service Bulletins for Clutch Disc: > < Campaign - PCM Connector Modification|Page 6120
Page 1
background image

Clutch Disc: Customer Interest
M/T - Rattle Noise When Idling

NUMBER: 06-001-03

GROUP: Clutch

DATE: May 16, 2003

SUBJECT:
Rattle Sound From Transmission When Idling

OVERVIEW:
This bulletin involves replacing the clutch disc with a revised part.

MODELS:

2003

(DR)

Ram Truck

NOTE

THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH A 5.9L CUMMINS HIGH OUTPUT TURBO DIESEL (SALES CODE ETH)
AND NV5600 6 SPEED MANUAL TRANSMISSION (SALES CODE DEE) BUILT ON OR BEFORE MAY 11, 2003 (MDH 0511XX).

SYMPTOM/CONDITION:

Vehicle operator may describe a rattle sound when idling in neutral and the clutch pedal is released.

DIAGNOSIS:

If the sound is present1 depress the clutch pedal. If the sound is not present when the clutch pedal is depressed, perform the Repair Procedure.

PARTS REQUIRED:

REPAIR PROCEDURE:

1.

Replace the clutch disc (p/n 52107775AC). Refer to the service information available in TechCONNECT/MDS2 or the 2003 Ram Truck Service
Manual (Publication No. 81-370-03059) page 6-6.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

FAILURE CODE:

All Technical Service Bulletins for Clutch Disc: > < Campaign - PCM Connector Modification|Page 6120