RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Parking Assist Warning Indicator: Description and Operation
Park Assist Display - Description
DESCRIPTION
The Park Assist display is an integral part of the Electronic Vehicle Information Center (EVIC). The park assist ICON, See: Application and
ID/International Control and Display Symbols for image information, is only displayed when an object is detected. An electronic message is sent to the
Cab Compartment Node (CCN) from the park assist module, over the Controller Area Network (CAN) Data Bus when an object is within the detection
area. The CCN then displays the object detection icon with the corresponding alert bar for the distance and location of the object within the EVIC
display.
Depending on market and system capabilities, the display icon has as many as 24 different variations with the corresponding alert bars, depending on
size, location and distance of the object being detected. The image will display three solid bars followed by a single tone for maximum distance then will
flash and reduce the amount of bars as the proximity to the object is reduced followed by a repetitive tone, down to a single bar with a continues tone.
The EVIC display is only serviced as a complete unit with the instrument cluster. It cannot be adjusted or repaired. If ineffective or damaged, the entire
display unit must be replaced, See: Driver/Vehicle Information Display/Description and Operation/Electronic Vehicle Information Center - Description
for more information.
