RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
6. Position the wheelhouse splash shield back and install the push pins (3).
Sport
1. Locate the fascia (1) over the upper surface of the bumper beam (2).
2. Position the center locator pin in the center of the fascia to the retainer hole and seat fully.
3. Pry or bend the outer ears of the fascia (1) around the headlamps and align to the fender (3).
4. Confirm that the fascia (1) and the bumper (2) are lined up correctly and seat the upper clips fully.
5. Install the grille. See: Grille/Service and Repair/Grille - Installation
6. Install the four lower fasteners (2).