RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Rear Door Hinge: Removal and Replacement
Rear Door Hinge - Removal
REMOVAL
NOTE: It is not necessary to remove the door to replace the hinges if they are replaced one at a time.
NOTE: A suitable body sealant should be used when removing or moving the hinges.
1. Open the front door
2. Using a grease pencil or equivalent, mark the position of the hinge on the door and B-pillar.
3. Remove the nuts (3) attaching the hinge to the door (1).
4. Remove the bolts (2) attaching the hinge (1) to the B-pillar and remove the hinge.
Rear Door Hinge - Installation
INSTALLATION