RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
NOTE: A suitable body sealant should be used when removing or moving the hinges.
1. Install the hinge (1) and install the B-pillar bolts (2).
2. Tighten the bolts to 24 Nm (18 ft. lbs.).
3. Position rear door assy studs (2), through appropriate holes in hinge assy.
NOTE: The shoulders of the studs (2) must be fully engaged into hinges, prior to securing.
4. Install the nuts and tighten to 22 Nm (16 ft. lbs.).
5. Adjust the door if needed. See: Adjustments