RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
1. Position the upper trim (1) back in place and seat the clips fully.
2. Install the turning loop bolt (2) and tighten to 40 Nm (30 ft. lbs.).
3. Install the turning loop cover.
4. Install the lower C-pillar trim (2). See: Pillar Trim/C-Pillar Trim Panel - Installation
Mega Cab
1. Position the upper trim back in place and seat the clips fully.
2. Install the turning loop bolt (2) and tighten to 40 Nm (30 ft. lbs.).
3. Install the lower C-pillar trim. See: Pillar Trim/C-Pillar Trim Panel - Installation