RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
3. Remove the inboard shield screw (1).
4. Remove the inboard side shield (2).
5. Using a door handle clip tool (1) or equivalent, release the clip holding the handle (2) onto the seat and remove the handle.
NOTE: Power seat bezel shown, manual seat bezel similar.
6. Using trim stick C-4755 or equivalent, release the six tabs (3) and separate the bezel (1) from the side shield.
7. Pull the bezel (1) rearward and release the front retaining tab (2).
