RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Tailgate Release Handle: Service and Repair
Latch Release Handle - Removal
REMOVAL
1. Open the tailgate and remove the tailgate liner, if equipped, and cover. See: Tailgate Interior Trim Panel/Service and Repair/Tailgate Cover -
Installation
2. Using a grease pencil or equivalent, mark the location of the actuator rods (2) at the control.
3. Disconnect the actuator rods from the control.
4. Disconnect the backup camera electrical connector (1), if equipped.