RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Tailgate Release Handle: Service and Repair
Latch Release Handle - Installation
INSTALLATION
1. Position the release handle (1) and the control (2) onto the tailgate.
2. Install the two nuts (3) that secure the release handle and control to the tailgate. Tighten the nuts to 6 Nm (53 in. lbs.).
3. Connect the backup camera electrical connector (1), if equipped.
4. Locate the actuator rods (2) to the control using the reference marks made during the removal procedure and connect the rods to the control.
