RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
1. Position the front door seal (2 and 3) to the bottom of the door opening, with bulb facing outboard, starting the installation at the center of the
lower flange. Press the seal onto the sill flange and work around the perimeter of the door opening until fully seated. Work in one direction,
smoothing the seal to avoid puckers or wrinkles.
2. Install the lower B-pillar trim. See: Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim Panel - Installation.
3. Install the cowl trim panel. See: Interior Moulding / Trim/Trim Panel/Service and Repair/Cowl Trim Panel - Installation
NOTE: When installing a new weatherstrip on the front door opening, remove the tear strip starting at the splice and moving around the
front of the door to the back of the opening.
REAR DOOR SEAL
1. Position the rear door seal (1 and 7) to the bottom of the door opening, with bulb facing outboard, starting the installation at the center of the lower
flange. Press the seal onto the sill flange and work around the perimeter of the door opening until fully seated. Work in one direction, smoothing
the seal to avoid puckers or wrinkles.
2. Install the lower C-pillar trim. See: Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim Panel - Installation.
