RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Recall VIN lists may contain confidential, restricted owner name and address information that was obtained from the Department of Motor Vehicles of
various states. Use of this information is permitted for this recall only and is strictly prohibited from all other use.
Additional Information
If you have any questions or need assistance in completing this action, please contact your Service and Parts District Manager.
Customer Services Field Operations
Chrysler Group LLC
Service Procedure
A. Inspect Brake Pedal Linkage Clip (Dodge Ram Trucks Only)
NOTE:
This procedure only applies to Dodge Ram truck models. All other vehicles proceed to Section B of this repair procedure.
1. Open the driver's front door.
2. Looking up under the instrument panel, by the brake pedal arm, inspect for the presence of a brake pedal linkage clip at the brake booster input rod
(Figure 1):
>
If the brake pedal linkage clip is present, no further action is required.
>
If the brake pedal linkage clip is missing, install a new clip.
NOTE:
An audible "click" will be heard when the clip is properly installed.
B. Replace Brake Pedal Linkage Clip (All Models except Dodge Ram Trucks)
1. Open the driver's front door.
