RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
6. Remove the caliper slide pin bolts (2).
7. Remove the disc brake caliper (1) from the caliper adapter (2).
Rear
REAR
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to
hang the caliper securely.
1. Install prop rod on the brake pedal to keep pressure on the brake system, Holding pedal in this position will isolate master cylinder from hydraulic
brake system and will not allow brake fluid to drain out of brake fluid reservoir while brake lines are open. This will allow you to bleed out the