RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
7. Install outboard brake shoe (1) in adapter (2).
8. Tilt the top of the caliper over rotor and under adapter. Then push the bottom of the caliper down onto the adapter.
9. Install caliper See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Installation.
10. Install wheel and tire assemblies and lower vehicle See: Maintenance/Wheels and Tires/Specifications.
11. Apply brakes several times to seat caliper pistons and brake shoes and obtain firm pedal.
12. Top off master cylinder fluid level.
Light Duty
FRONT - LIGHT DUTY
1. Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
2. Clean caliper mounting adapter.
3. Install new anti-rattle clips (1) to the brake pads (2).
