RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Brake Rotor/Disc: Removal and Replacement
Front
FRONT
1. Raise and support the vehicle See: Maintenance.
2. Remove the wheel and tire assembly.
NOTE: Do not allow brake hose to support caliper adapter assembly (1).
3. Remove the two caliper adaptor bolts (5) from the steering knuckle (4), remove caliper adapter assembly (1), and hang aside.
4. Remove the rotor (2) from the hub/bearing (3).
Rear
REAR
1. Raise and support the vehicle
2. Remove the tire and wheel assembly.
3. Remove the disc brake caliper (3), See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Removal.
4. Remove the caliper adapter (2) bolts.See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper Adapter - Removal
5. Remove the retaining clips and rotor assembly (1).