RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
1. Install the rotor (2) onto the hub/bearing (3).
2. Install the caliper adapter assembly (1) See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Installation and
tighten adapter bolts (5) to 176 Nm (130 ft.lbs.).
3. Install the wheel and tire assembly See: Maintenance/Wheels and Tires/Specifications.
4. Remove the supports and lower the vehicle.
5. Apply the brakes several times to seat brake pads. Be sure to obtain firm pedal before moving vehicle.
Heavy Duty
REAR - HEAVY DUTY
1. Install the rotor (1) to the axle shaft.
2. Install the caliper adapter (2) See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper Adapter - Installation.
3. Install the caliper adapter bolts and tighten to 328 Nm (242 ft.lbs).
4. Install the disc brake caliper (3) See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Installation.
5. Install the tire and wheel assembly See: Maintenance/Wheels and Tires/Specifications.
6. Remove the supports and lower the vehicle.
Light Duty