RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
REAR - LIGHT DUTY
1. Install the rotor (1) to the axleshaft.
2. Install the caliper adapter (2) See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper Adapter - Installation.
3. Install the caliper adapter bolts and tighten the mounting bolts to 163 Nm (120 ft.lbs).
4. Install the disc brake caliper (3), See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Installation.
5. Install the tire and wheel assembly See: Maintenance/Wheels and Tires/Specifications.
6. Remove the support and lower the vehicle.
Rear - Dual Rear Wheels (DRW)
REAR - DUAL WHEELS
1. Install the hub to the rotor. Tighten the bolts (1) to 154.5 Nm (114 ft. lbs.).