RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to
hang the caliper securely.
4. Remove the disc brake caliper (1) from the adapter (2).
5. Remove the inboard (4) and outboard (2) brake pads.
6. Remove the caliper adapter mounting bolts (5).
7. Remove and transfer any necessary components.
Rear
REAR
1. Raise and support the vehicle, See: Maintenance.
2. Remove the wheel and tire assembly.
3. Drain a small amount of fluid from master cylinder brake reservoir with a clean suction gun.
4. Bottom the caliper pistons into the caliper by prying the caliper over.
5. Remove the caliper slide bolts.
6. Remove the disc brake caliper from the mount.