RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
2. Raise and support the vehicle. See: Maintenance.
3. Remove the appropriate line connector (1 or 6) from the junction block (2) located on the frame.
NOTE: The right brake line has three push type retainers, and the left brake line has only one push type retainer.
4. Remove the brake line retainer clip(s) (7, left side shown)
5. Remove the antilock sensor harness (1) from the routing clips (2) on the brake hose.
6. Remove the banjo bolt (4) at the caliper.
7. Remove the brake hose retainer clip bolt (1) located at the frame.
8. Remove the brake line.
Rear Tube / Hose Assembly - Heavy Duty (HD)
