RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Cruise Control Switch: Service and Repair
Speed Control Switch - Installation
INSTALLATION
The speed control switch is mounted in the steering wheel and wired through the clock spring device under the airbag module.
1. Install the speed control switch.
2. Install the fastener (1) from the back side of the speed control switch through the access hole (2) on the back of the steering wheel, and tighten to
1.6 Nm (15 in. lbs.)
3. Install the fastener (1) at the front side of the speed control switch and tighten to (1) to 1.6 Nm (15 in. lbs.).
4. Install drivers airbag See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Driver Air Bag - Installation
.
5. Install the steering column shrouds.