RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Timing Cover: Service and Repair
Engine Timing Cover(s) - Removal
REMOVAL
1. Disconnect both battery negative cables.See: Starting and Charging/Battery/Battery Cable/Service and Repair/Battery Cables - Removal
2. Raise vehicle on hoist.
3. Partially drain engine coolant into container suitable for re-use See: Cooling System/Service and Repair.
4. Lower vehicle.
5. Remove radiator upper hose.
6. Remove viscous fan/drive/shroud assembly See: Cooling System/Radiator Cooling Fan/Service and Repair/Electric Radiator Fan - Removal.
7. Remove the accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Serpentine Accessory Drive
Belt - Removal.
8. Remove the cooling fan support/hub from the front of the engine.