RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
10. Install the fan support/hub assembly, and tighten bolts to 32 Nm (24 ft. lbs.).
11. Install power steering pump.See: Steering and Suspension/Steering/Power Steering/Power Steering Pump/Service and Repair/Removal and
Replacement/Power Steering Pump - Installation
12. Install accessory drive belt tensioner. Tighten bolt to 43 Nm (32 ft. lbs.).
13. Install the accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Serpentine Accessory Drive
Belt - Installation.
14. Install the cooling fan/drive/shroud assembly See: Cooling System/Radiator Cooling Fan/Service and Repair/Electric Radiator Fan - Installation.
15. Install the radiator upper hose and clamps.
16. Fill the coolant systemSee: Cooling System/Service and Repair.
17. Connect both battery negative cables.See: Starting and Charging/Battery/Battery Cable/Service and Repair/Battery Cables - Installation
18. Start engine and inspect for leaks.