RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
-
Left Rear Turn Signal Lamp Out
-
Right Front Turn Signal Lamp Out
-
Right Rear Turn Signal Lamp Out
-
RKE Battery Low (with a single chime)
-
Memory 1/2 Profile Set
-
Memory 1/2 Profile Recall
-
Memory System Disabled - Vehicle Not In Park (with a single chime)
-
Memory System Disabled - Seat Belt Buckled (with a single chime)
-
Personal Settings Not Available - Vehicle Not in Park
-
Left/Right Front Door Ajar (one or more, with a single chime if speed is above 1 mph)
-
Left/Right Rear Door Ajar (one or more, with a single chime if speed is above 1 mph)
-
Door (S) Ajar (with a single chime if vehicle is in motion)
-
Low Washer Fluid (with a single chime)
-
Adjustable Pedals Disabled - Cruise Engaged
-
Adjustable Pedals Disabled - Vehicle In Reverse
-
Channel 1, 2, OR 3 Transmit
-
Channel 1, 2, OR 3 Training
-
Channel 1, 2, OR 3 Trained
-
Clearing Channels
-
Channels Cleared
-
Channels Defaulted
-
Did Not Train
-
Left Front Tire Low Pressure
-
Left Rear Tire Low Pressure
-
Right Front Tire Low Pressure
-
Right Rear Tire Low Pressure
-
Check Tire Pressure Monitoring (TPM) System
-
Service Park Assist System
TRIP MODE
Provides a choice of units displayed in English or metric. The following information can be displayed at the top of the screen:
-
Average Miles Per Gallon (MPG)
-
Distance to empty (DTE)
-
Trip A odometer
-
Trip B odometer
-
Elapsed time
The EVIC trip computer features several functions that can be reset. Pressing and releasing the SELECT button once, will clear the function currently
being displayed. Reset will only occur if a chosen function is currently being displayed. To reset all functions, press and release the SELECT button a
second time within 3 seconds of resetting the currently displayed function (>Reset ALL will be displayed during this 3 second window).
The odometer is displayed at the bottom of the screen. If warnings exist, they will replace the odometer in the display. The driver can scroll to view
information in the EVIC by using the SCROLL buttons.
COMPASS, TEMPERATURE
Compass heading and outside temperature are displayed at the top of the screen. Eight-point compass headings are displayed (N, S, E, W, NE, NW, SE,
SW) and up to 15 compass variance settings can be set and recalled. Outside temperature is displayed in °C (degrees Celsius) or °F (degrees
Fahrenheit).
NAVIGATION MODE - IF EQUIPPED
When the Navigation System is On, the steering wheel buttons can be used to select the Map or Menu display on the Navigation Unit. When the Menu
display is active, the SCROLL buttons can be used to scroll through the list, the SELECT button can be used to select an item, and the BACK button can
be used to return to the previous menu. When the Map display is active, pressing the SELECT button will change the Navigation Unit Display to the
Menu.
If Turn by Turn Navigation is enabled through Personal Settings, the Navigation System will provide turn by turn directions to the programmed
destination in the EVIC display. The name of the approaching road is displayed at the top of the screen, followed by an arrow to show the direction of
the turn and the remaining distance to the turn counted down.
PERSONAL SETTINGS MODE (CUSTOMER PROGRAMMABLE FEATURES)
Allows the driver to set and recall features when the transmission is in Park by pressing and releasing the SELECT and then the SCROLL buttons until
