RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Tire Pressure Warning Reset Switch: Service and Repair
Tire Pressure Monitoring Switch - Installation
INSTALLATION
1. Align the tabs of the switch/module to the instrument panel center bezel and gently push together until the tabs are securely in place.
2. Connect the switch/module electrical connectors.
3. Install the instrument panel center bezel, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Bezel - Installation.
4. Connect the battery negative cable.
5. Verify system operation.