RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
1. Raise and support vehicle.
2. If equipped, remove necessary skid plates. Certain models, equipped with a certain fuel tank size, may require the removal of the fuel tank skid
plate and/or the transfer case skid plate to gain access to the EVAP canister(s).
3. Disconnect electrical wiring connector from ESIM switch (3).
4. Disconnect vapor line (7) from ESIM switch.
5. Disconnect quick-connect vapor line (5) at canister.
6. Remove canister mounting bracket bolt (6).
7. Pull canister from mounting bracket while guiding two canister locating pins from mounting bracket.
Type-3 Canisters
Dual, vertically mounted EVAP canisters (1) and (4) are used with Type 3. The ESIM (Emission System Integrity Monitor) switch (2) is mounted to the
main canister (1). Canister (4) is considered a secondary canister.
1. Raise and support vehicle.
2. If equipped, remove necessary skid plates. Certain models, equipped with a certain fuel tank size, may require the removal of the fuel tank skid
plate and/or the transfer case skid plate to gain access to the EVAP canister(s).
3. Disconnect electrical wiring connector from ESIM switch (3).
4. Disconnect vapor line (9) from ESIM switch.
5. Disconnect quick-connect vapor line (7) at main canister.
6. Remove canister mounting bracket bolt (8).
7. Pull canister from mounting bracket while guiding two canister locating pins from mounting bracket.
8. To remove the secondary canister (4), remove mounting bolt. Pull canister from mounting bracket while guiding two canister locating pins (6)
from mounting bracket.
Type-4 Canisters