RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Leak Detector: Service and Repair
Removal
REMOVAL
The ESIM (EVAP System Integrity Monitor) switch is attached to the Evap canister and is usually not serviceable. Replace the switch by replacing the
Evap canister. See Evap canister removal/installation.
If servicing separately, refer to the following:
The ESIM switch (2) is located on the Evap canister (1) The picture displays a typical Evap Canister and a typical ESIM switch.
1. Remove both plastic lines from switch by folding line tabs (2).
