RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
11. Using Thread High Pressure Connector Remover 9015 (2), pry and remove the high-pressure connector tube(s) (4) from the cylinder head.
12. Remove fuel injector hold-down clamp bolts (1)
13. Remove necessary intake and exhaust rocker arm assembly(s).
NOTE: The rocker housing support bridge is bolted to the top of cylinder head. The mounting stud from Fuel Injector Removal/Installer
9010A was meant to temporarily replace a rocker housing mounting bolt.
