RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
9. Disengage the two clips that secure the belt web guide (2) to the B-pillar (6).
10. Remove the screw (3) that secures the upper retractor (4) bracket to the B-pillar.
11. Remove the screw (5) that secures the lower retractor bracket to the B-pillar.
12. Disengage the locating tab on the upper retractor bracket from the clearance hole in the inner B-pillar.
13. Remove the front outboard seat belt and retractor from the B-pillar as a unit.
14. Disconnect the yellow connector (2) of the body wire harness (3) from the seat belt tensioner initiator on the retractor (1).
15. Remove the front outboard seat belt and retractor from the vehicle as a unit.
Rear Center - Quad or Crew Cab
REAR CENTER - QUAD OR CREW CAB
WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt
that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or
ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child
restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or
child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new
and unused replacement parts listed in the Chrysler Mopar (R) Parts Catalog. Failure to follow these instructions may result in
possible serious or fatal injury.
NOTE: The rear center seat belt and retractor is secured to a mounting bracket that includes the right outboard occupant seat belt buckle.
The rear right outboard occupant buckle is available for service only as a unit with the center seat belt and retractor.
NOTE: All seat belt retractors except the driver side front retractor include a switchable automatic locking mechanism. See: Description and
