RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
O2 SENSOR LOCATION
4. Install the O2 sensor (2). Tighten to 50 Nm (37 ft. lbs.).
5. Connect the O2 sensor harness connector.
6. Lower vehicle.
7. Connect both negative battery cables.
O2 SENSOR LOCATION
4. Install the O2 sensor (2). Tighten to 50 Nm (37 ft. lbs.).
5. Connect the O2 sensor harness connector.
6. Lower vehicle.
7. Connect both negative battery cables.