RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Power Steering Fluid Cooler: Service and Repair
Power Steering Cooler - Installation
INSTALLATION
1. Position the fluid cooler (1) to the vehicle.
2. Install the mounting bracket bolts (2) securing the fluid cooler (1) to the brace.
3. Install and clamp the return and supply hoses to the power steering fluid cooler lines (3).
4. If equipped, position the lower engine splash shield (2) and install the eight retainers (1).
5. Remove the support and lower the vehicle.
6. Refill the power steering fluid See: Power Steering Pump/Service and Repair/Procedures.
