RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Wheel Bearing: Service and Repair
Installation
4X2
1. Install the brake dust shield (2).
2. Install the hub/bearing (1) into the steering knuckle (3) and tighten the bolts (5) to 163 Nm (120 ft. lbs.).
3. Install the brake rotor and caliper, See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Installation.
4. Install the ABS wheel speed sensor (4) if equipped, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed
Sensor/Service and Repair/Wheel Speed Sensor - Installation/Front.
5. Install the wheel and tire assembly, See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
6. Remove the support and lower vehicle.