RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
Flywheel: Service and Repair
Removal
REMOVAL
1. Remove the transmission. See: Manual Transmission/Transaxle/Service and Repair/Removal and Replacement/G56 Manual Transmission -
Removal.
NOTE: Vehicles with Dual Mass Flywheel use an adapter plate between the flywheel and crank. This plate does not need to be removed.
2. Remove the dust cover bolts (1) and the dust cover (2).
3. Using the access hole, remove each flexplate-to-flywheel bolt (1). Use Barring Tool 7471B to rotate the engine and flywheel.
