RAM 3500 Truck 2WD V10-8.0L VIN W (1997)
Brake Shoe Position In Caliper
4. Install outboard brake shoe in caliper. Be sure spring ends are seated in dimples in caliper.
Caliper Installation
5. Install caliper over rotor and into steering knuckle mounting arms. Be sure caliper is seated flush on mounting arm surfaces as shown.
6. Start caliper mounting bolts by hand to avoid cross threading. Then tighten mounting bolts to 51 Nm (38 ft. lbs.) torque.
7. Install wheel and tire assemblies.
8. Pump brake pedal to reseat caliper pistons and brake shoes. Do not move vehicle until shoes have been properly seated.
9. Check brake fluid level and add fluid if necessary.