RAM 3500 Truck 2WD V10-8.0L VIN W (1997)
Master Cylinder/Combination Valve Bracket Mounting
2. Install combination valve bracket on mounting studs. Bracket goes on top of cylinder mounting.
3. Start all brake line fittings in cylinder and valves by hand.
4. Install master cylinder attaching nuts on booster studs. Tighten nuts to 23-34 Nm (17-25 ft. lbs.).
5. Have an assistant depress the brake pedal slowly and hold it down.
6. Tighten brake line fittings to 16-23 Nm (12-17 ft. lbs.).
