RAM 3500 Truck 2WD V10-8.0L VIN W (1997)
Fuel Injector: Service and Repair
Fuel Injectors
Fuel Injector Removal And Replacement
WARNING: The fuel system is under a constant pressure even with the engine turned off. Before servicing the fuel injector(s), the fuel system
pressure must be released.
To remove one or more fuel injectors, the fuel rail assembly must be removed from engine.
REMOVAL
1. Remove air cleaner assembly.
2. Remove fuel injector rail assembly.
3. Remove the clip(s) retaining the injector(s) to fuel rail.
4. Remove injector(s) from fuel rail.
INSTALLATION
1. Apply a small amount of engine oil to each fuel injector. This will help in fuel rail installation.
2. Install injector(s) and injector clip(s) to fuel rail.
3. Install fuel rail assembly.
4. Install air cleaner.
5. Start engine and check for leaks.