dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Automatic Shut Down (ASD) Relay <--> [Main Relay (Computer/Fuel System)] > < Initial Inspection and Diagnostic Overview

RAM 3500 Truck 2WD V10-8.0L VIN W (1997)

Page 1
background image

Powertrain Control Module: Service and Repair

Fig. 34 Powertrain Control Module (PCM)

REMOVAL

1. Disconnect the negative battery cable at battery.
2. Carefully unplug the three 32-way connectors from PCM.
3. Remove three Powertrain Control Module (PCM) mounting bolts and remove PCM from vehicle.

INSTALLATION

1. Install PCM and mounting bolts to vehicle.
2. Tighten bolts to 4 N.m (35 in. lbs.).
3. Check pin connectors in the PCM and the three 32-way connectors for corrosion or damage. Repair as necessary
4. Install three 32-way connectors.
5. Install battery cable.

Automatic Shut Down (ASD) Relay <--> [Main Relay (Computer/Fuel System)] > < Initial Inspection and Diagnostic Overview