RAM 3500 Truck 2WD V10-8.0L VIN W (1997)
Fuel Gauge Sender: Description and Operation
The fuel gauge sending unit (fuel level sensor) is attached to the side of the fuel pump module. The sending unit consists of a float, an arm, and a
variable resistor (track). The resistor track is used to send electrical signals for both fuel gauge operation and OBD II emission requirements.
For fuel gauge operation: As fuel level increases, the float and arm move up. This decreases the sending unit resistance, causing the fuel gauge to
read full. As fuel level decreases, the float and arm move down. This increases the sending unit resistance causing the fuel gauge to read empty.
For OBD II emission requirements: The voltage signal is sent from the resistor track to the Power train Control Module (PCM) to indicate fuel
level. The purpose of this feature is to prevent a false setting of misfire and fuel system monitor trouble codes if the fuel level in the tank is less
than approximately 15 percent of its rated capacity.
