RAM 3500 Truck 2WD V10-8.0L VIN W (1997)
Valve Body: Service and Repair
Assembly
Boost Valve and Brace Assembly
Boost Valve Tube
1. Position valve body assembly so lower housing is facing upward.
2. Lubricate tube ends and housing ports with transmission fluid or petroleum jelly.
3. Start tube in lower housing port first. Then swing tube downward and work opposite end of tube into upper housing port.
4. Insert and seat each end of tube in housings.
Boost Valve Tube And Brace
5. Slide tube brace under tube and into alignment with valve body screw holes.
6. Install and finger tighten three screws that secure tube brace to valve body housings.
Securing Boost Valve Tube With Brace Tabs