RAM 3500 Truck 2WD V10-8.0L VIN W (1997)
b.
Assemble puller flange Special Tool 6444-1 and puller rods Special Tool 6444-3 for 4X2 models or 6444-4 for 4X4 models (Figure 11).
c.
Slide assembled puller flange and rods onto output shaft. Then, seat flange in notch of puller jaw.
d.
Position second puller jaw Special Tool 6820 onto gear and the notch on the puller flange.
e.
Slide retaining collar Special Tools 6444-8 over puller jaws to hold them in place (Figure 12).
