RAM 3500 Truck 2WD V10-8.0L VIN W HDC (2000)
2. Remove window crank, if equipped.
3. Remove screw attaching trim panel to outside mirror frame.
Fig. 25 Door Trim Panel
4. Remove screws attaching pull cup to door.
5. Using a trim panel removal tool, disengage clips around perimeter of trim panel, attaching trim panel to door.
6. While holding bottom of trim panel away from door, simultaneously lift upward and inboard.
7. Disengage power mirror switch connector, if equipped.
Fig. 26 Power Window/Lock Switch Panel
8. Disengage power window/lock switch connectors from switch panel, if equipped.
9. Separate trim panel from door.
INSTALLATION
1. Engage power mirror switch connector, if equipped.
2. Engage power window/lock switch connectors to switch panel, if equipped.
3. Position trim panel on door.
