RAM 3500 Truck 2WD V10-8.0L VIN W HDC (2000)
INSTALLATION
QUAD CAB
1. Route the shoulder belt through the slot in the trim.
2. Position the trim and seat the attachment clips fully.
3. Install the rear door sill trim.
STANDARD CAB
1. Position the trim and seat the attachment clips fully.
2. Install the seat belt anchor and bolt and tighten to 40 N.m (30 ft.lbs).
BOTH BODY STYLES
1. Install the cowl trim. Refer to Trim panel.
2. Install the upper b-pillar trim.
B-Pillar Upper Trim
B-PILLAR UPPER TRIM
REMOVAL
1. Remove the seat belt turning loop.
Fig. 6
2. Open the trim plugs and remove the grab handle bolts, if equipped. (Fig. 6)
