RAM 3500 Truck 2WD V10-8.0L VIN W HDC (2000)
Fig. 5
1. On standard cab models, remove the screws from the side of the door. (Fig. 5)
Fig. 6
2. On quad cab models, remove the lower screw from the side of the door, loosen the upper screw and disengage from the door. (Fig. 6)
3. Separate the glass run weatherstrip from the rear channel and remove the channel.
INSTALLATION
FRONT RUN CHANNEL
1. Install the channel, position the screws in the door panel slots and slide into place.