RAM 3500 Truck 2WD V10-8.0L VIN W HDC (2000)
Cabin Ventilation Grille: Service and Repair
BODY VENT
REMOVAL
1. Remove the cab back panel trim. Refer to Trim Panel.
Fig. 20
2. While holding the vent, press the tabs to release the vent into the cab back panel. (Fig. 20)
3. Twist the vent and remove through the vent hole.
INSTALLATION
1. Position the vent into the vent hole in the cab back panel.
2. Twist the vent and pull it into the hole frame and seat the tabs fully.
3. Install the cab back panel trim.