RAM 3500 Truck 2WD V10-8.0L VIN W HDC (2000)
Turn Signal Switch: Service and Repair
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIRBAGS AND SEAT BELTS/AIRBAGS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. If the vehicle is so equipped, unscrew the lever from the tilt steering column adjuster mechanism located on the left side of the column just below
the multi-function switch stalk. Turn the lever counter clockwise to unscrew it from the column.
Steering Column Shrouds Remove/Install - Typical
3. Remove both the upper and lower shrouds from the steering column.
4. Remove the lower fixed column shroud from the steering column.
