RAM 3500 Truck 2WD V10-8.0L VIN W HDC (2000)
Brake Lamp Relay: Description and Operation
TAIL/STOP/TURN SIGNAL/BACK - UP LAMP DESCRIPTION
There are two types of taillamp modules used on the Ram Truck. One type is integrated into the pick-up bed, The other is a bracket mounted module
used on the Ram Truck Cab and Chassis. The Cab and Chassis module is made up of a housing, lens, and two bulbs. This type of module has license
plate illumination built into the lens. The integrated pick up module contains a housing, lens, and two bulbs. A dual filament bulb is used for tail, stop,
and turn signal operations. A separate bulb is used for backup illumination
OPERATION
Tail lamp functions are controlled by the headlamp switch. Turn signal operations are controlled by the multifunction switch. Stop lamp functions are
controlled by the stoplamp switch. The back-up lamps are controlled by the back-up lamp switch on the transmission.
