RAM 3500 Truck 2WD V10-8.0L VIN W HDC (2000)
Technical Service Bulletin # 08-01-00A
Date: 000630
Starter Relay Fuse - No Start/Engine Will Not Crank
NUMBER: 08-01-00 Rev. A
GROUP: Electrical
EFFECTIVE DATE: June 30, 2000
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 08-01-00, DATED JAN. 21, 2000, WHICH SHOULD BE REMOVED FROM
YOUR FILES. THIS IS A COMPLETE REVISION AND NO ASTERISKS HAVE BEEN USED TO HIGHLIGHT REVISIONS.
SUBJECT:
No Start (Engine Will Not Crank) Due To A Blown Starter Relay Circuit Fuse
OVERVIEW:
This bulletin involves installing a starter solenoid jumper relay/harness assembly and a new fuse.
MODELS:
2000
(AB)
Ram Van/Wagon
2000 - 2001
(BR/BE)Ram Truck
NOTE:
THIS BULLETIN APPLIES TO RAM TRUCKS AND RAM VANS/WAGONS BUILT BEFORE THE FOLLOWING DATES:
RAM VANS/WAGONS
^
PILLETTE ROAD ASSEMBLY PLANT - ALL EXCEPT CNG VEHICLES - JANUARY 18, 2000 (MDH 0118XX). CNG VEHICLES -
JANUARY 25, 2000 (MDH 0125XX).
RAM TRUCKS
^
ST. LOUIS ASSEMBLY PLANT (11TH VIN POSITION = "J") - JANUARY 25, 2000 (MDH 0125XX)
^
WARREN TRUCK ASSEMBLY PLANT (11TH VIN POSITION = "S") - FEBRUARY 2, 2000 (MDH 0202XX).
^
SALTILLO TRUCK ASSEMBLY PLANT (11TH VIN POSITION = "G") - FEBRUARY 7, 2000 (MDH 0207XX).
^
LAGO ALBERTO ASSEMBLY PLANT (11TH VIN POSITION = "M") - FEBRUARY 14, 2000 (MDH 0214XX).
SYMPTOM/CONDITION:
The vehicle will not start (engine will not crank) due to a blown starter relay circuit fuse.
