RAM 3500 Truck 2WD V10-8.0L VIN W HDC (2000)
Fuel Gauge Sender: Service and Repair
Fig. 32 Fuel Gauge Sending Unit Location (Typical)
The fuel gauge sending unit (fuel level sensor) and float assembly is located on the side of fuel pump module (Fig. 32). The fuel pump module is located
inside of fuel tank.
REMOVAL
1. Remove fuel tank. Refer to Fuel Tank-All Engines in the Removal/Installation.
2. Remove fuel pump module. Refer to Fuel Pump Module Removal/Installation.
3. Unplug 4-way electrical connector (Fig. 32).
4. Disconnect 2 sending unit wires at 4-way connector. The locking collar of connector must be removed before wires can be released from
connector. Note location of wires within 4-way connector.
