RAM 3500 Truck 2WD V10-8.0L VIN W HDC (2000)
Fig. 30
15. Remove the rear bearing from the pinion (Fig. 30) with Puller/Press C-293-PA and Adapters C-29337.
Place 4 adapter blocks so they do not damage the bearing cage.
16. Remove the depth shims from the pinion shaft. Record the thickness of the depth shims.
INSTALLATION
1. Apply Mopar Door Ease, or equivalent, stick lubricant to outside surface of bearing cup.
Fig. 31
2. Install the pinion rear bearing cup (Fig. 31) with Installer C-4310 and Driver Handle C-4171.
2. Ensure cup is correctly seated.
3. Apply Mopar Door Ease, or equivalent, stick lubricant to outside surface of bearing cup.
