RAM 3500 Truck 2WD V10-8.0L VIN W MDC (1999)
Marker Lamp Bulb: Service and Repair
Rear Side Marker Lamp Bulb
REMOVAL
Individual lamps may be replaced by removing the lamp from the light bar. Using a flat blade screwdriver, carefully pry lamp to disengage clips
attaching ID lamp to retainer.
Rear Identification Lamps
1. Remove four screws attaching rear ID lamps to tailgate.
2. Separate ID lamps from tailgate.
3. Disengage ID lamp wire connector from body wire harness.
4. Separate ID lamp from vehicle.
INSTALLATION
1. Position ID lamp on vehicle.
2. Engage ID lamp wire connector to body wire harness.
3. Install screws attaching rear ID lamps to tailgate.
