RAM 3500 Truck 2WD V10-8.0L VIN W MDC (1999)
Electronic Brake Control Module: Service and Repair
Controller Antilock Brake (CAB) Replacement
Four Wheel Antilock Brake System
NOTE: If the CAB needs to be replaced, the rear axle type and tire revolutions per mile must be programmed into the new CAB. For axle type refer
to Transmission and Drivetrain. For tire revolutions per mile refer to Steering and Suspension.
REMOVAL
1. Disconnect battery negative cable.
Harness Connector Locks
2. Push the harness connector locks to release the locks, then remove the connectors from the CAB.
Pump Motor Connector
3. Disconnect the pump motor connector.